Overview
Every account starts on the ServiceTitan-recommended booking flow, live as-is, with nothing to set up. Use the job booking configuration page when you want to change it: reorder the steps, decide whether CSRs must work through them in order, add question steps that fill in the job type, business unit, and tags from the caller's answers, and add your own custom script steps for seasonal promotions, discounts, or anything else your team should say on a call.
Who uses this feature
Administrators
Applies to all business types
Feature configuration
Coming ST-83: This feature is available to all eligible Contact Center Pro accounts.
Contact Center Pro requires an Enterprise Hub network. Contact your Customer Success Manager or Pro Account Manager to request a network.
You can only configure the accounts you are permissioned to.
Things to know
Caution: There is no draft. Clicking Save applies your changes to the live flow straight away, and your CSRs see them on their next booking. There is also no way to park partial work: if you navigate away before saving, your changes are discarded. Coming ST-83: The Agent step navigation section works differently. Its Save updates a page draft, and Save Changes applies it to the live flow.
Every account runs the ServiceTitan-recommended flow by default. It is already live and needs no configuration.
Configuration is per account. Selecting an account loads its flow, and everything you change applies only to that account.
You cannot save while the flow has unresolved errors, such as a custom step that is not fully filled in. Fix the step or remove it from the flow before saving.
Custom steps live in a library. A step in the library is not in your flow until you add it, and an incomplete step sitting in the library does not block you from saving.
Best practices
Make changes outside your busiest call hours. There is no draft, so a save goes live to CSRs immediately.
Finish a custom step in one sitting. Because there is no save-as-draft, navigating away loses the work.
Keep the number of required custom steps small. Every step a CSR must complete adds time to a live call.
Tell your CSRs before you change the step order or add a required step, so the flow does not change under them mid-shift.
Open the job booking configuration page
In Contact Center Pro, go to Settings > Job Booking.
The page opens blank, with only the account selector. Nothing loads until you choose an account.
Select the account you want to configure. Each account in the list is labeled to show whether it is running the Default flow or a Custom flow.
The account's flow loads into the configurator, and every change you make from here applies to that account only.
Note: The page deliberately starts empty so you always choose an account before making changes, rather than editing one you did not mean to.
Reorder the booking steps
Open the configuration page and select an account.
Drag the steps into the order you want your CSRs to work through them.
.png?sv=2026-02-06&spr=https&st=2026-11-22T13%3A19%3A14Z&se=2026-11-22T13%3A34%3A14Z&sr=b&sp=r&sig=7rB2vayqWxq132NedhOc9O1kRpxkmuOKoSJCyQRaz7U%3D)
Click Save.
The default order reflects ServiceTitan's research into what script order converts calls into jobs, so change it only where your business genuinely books differently.
Reorder Job Type, Business Unit, and Priority
Coming ST-83: Job Type, Business Unit, and Priority show as rows under the Job Type & Business Unit step. Put them in the order your CSRs ask them, for example business unit first.
Open the configuration page and select an account.
Under the Job Type & Business Unit step, drag Job Type, Business Unit, and Priority into the order you want.
Click Save.
CSRs see the three fields in the order you saved. Accounts that change nothing keep the default order.
Set whether CSRs follow the order
You can let CSRs complete the steps in whatever order the conversation takes, or require them to work top to bottom. Coming ST-83: You can also keep every step open at once, so CSRs save the whole booking with one click.
Open the configuration page and select an account.
Set the order behavior:
Any order: CSRs can complete the steps in whichever order suits the call. Use this when your callers tend to volunteer information out of sequence.
Fixed order: CSRs must complete each step before moving to the next. Use this when you want a consistent script on every call.
.png?sv=2026-02-06&spr=https&st=2026-11-22T13%3A19%3A14Z&se=2026-11-22T13%3A34%3A14Z&sr=b&sp=r&sig=wlmQgm%2FOkIgnTlFYgGIGMeQcXX2f2gTKsJGtr%2BAkHLI%3D)
Coming ST-83: All steps editable at once: Every step stays open at the same time, steps have no Save or Cancel buttons, and CSRs save everything with one click on Book Job. Missing required fields show on their steps. Use this when your CSRs are used to filling in a booking in any order and saving once. This option is not selected by default.
Coming ST-83: Click Save in the Agent step navigation section to update the page draft, then click Save Changes to apply it to the live flow.
Add a custom step
Custom steps let you put your own script in front of CSRs at the right moment, and show it only for the work it applies to.
Open the configuration page and select an account.
Add a new custom step and give it a Name. This is what your CSRs see as the step heading.
.png?sv=2026-02-06&spr=https&st=2026-11-22T13%3A19%3A14Z&se=2026-11-22T13%3A34%3A14Z&sr=b&sp=r&sig=OBZR%2BpQWD7R8xZn3Y23%2BwMeCQ%2B2GLAMpKG9%2B1138ZT0%3D)
Decide when the step appears:
Always shown: The step appears on every booking.
Specify: The step appears only for the work you choose. Select what to filter by — job type, business unit, zone, or marketing campaign (coming ST-83) — then select the values it applies to. Coming ST-83: In every order mode, the step appears as soon as the CSR picks a matching job type, business unit, or zone, without first saving the step that holds it.
Note: Coming ST-83: A step filtered by marketing campaign shows only when the campaign fills in automatically from the number the customer called or texted. A campaign the CSR picks by hand, or the company default campaign, doesn't show it. Once the step shows, it stays even if the CSR changes the campaign. Select at least one campaign. A campaign with no tracking number shows a warning, because it never triggers the step. You can place a campaign step anywhere in the flow, even first.
Enter the agent script, the wording your CSR reads or follows on the call.
Add the step to the booking flow, then place it where you want it in the order.
Click Save.
Note: A custom step is only complete when it has a name, a choice between Always shown and Specify, the filter and values if you chose Specify, and an agent script. An incomplete step that is in your flow blocks saving.
Add a question step
Question steps ask the caller a few short questions. Each answer fills in or narrows the job type, business unit, and tags for the job, so CSRs book to the right place without knowing your setup. A question step always sits after Location and before Job Type & Business Unit, so Location must come first in your flow.
For setup steps, see Fill in job details with question steps in Contact Center Pro.