Overview
Job Types describe the kinds of work your customers book, such as a no-heat Call or a water heater install. Each Job type sets defaults for the jobs booked with it, so a clean list makes booking faster and keeps scheduling, dispatching, and reporting accurate.
This article explains when to add a job type, how to name and set one up, and which job types we recommend for each trade. To learn how job types fit with business units and skills, see Set up job types, business units, and skills.
Who uses this feature?
Administrators, managers, and office employees
Primarily benefits Residential Service and Replacement business types
Applies to all trades
Job types
A job type is added to a job when it's booked. It sets defaults for that job, including:
Business unit: The business units the job type can be booked under. When a CSR selects a business unit, only its job types are shown.
Required skills: The skills a technician needs for the job.
Priority: How urgent the job is.
Duration: How much time the job takes up on the Dispatch Board and Schedule Board.
Sold threshold: The minimum amount for the job to count as sold.
Job types also show up on job records, invoices, and reports, and you can use them to filter the Schedule Board.
What you need to know about job types
When to add a job type
Add a job type when the work needs different defaults than your existing job types, such as a different duration, skill, business unit, or priority. You might also add one when you want to report on that work separately. If the defaults would be the same, use an existing job type instead.
How detailed to get
How many job types you need depends on how often you do each type of work:
Start with general job types: For example, use one Estimate job type for all equipment. Fewer job types are easier for CSRs to choose from.
Add specific job types when the volume justifies it: When you do a type of work often enough to track it on its own, add a job type for it, such as a separate estimate job type for each kind of equipment. This lets you send the right technician and report on each type of work.
The recommended lists include both. For example, HVAC-Estimate is a general catch-all, and HVAC-Estimate-AC and HVAC-Estimate-Boiler are more specific. See the recommended job types below for more examples. The recommendations are a menu, not a checklist. Many job types are optional, depending on the work you do. For example, if you don't service pool heaters, you don't need a pool heater job type.
Naming your job types
Name each job type in this order: trade, division, then the specific work. Add an age identifier at the end if you use one. For example:
HVAC-Service-No Heat
PLM-Install-Tankless Water Heater
ELEC-Maintenance
Separate each part with a hyphen and no spaces. Starting with the trade and division keeps related job types together in dropdown lists, so CSRs can find the right one quickly and trust they aren't missing one that's named differently.
If you already use ServiceTitan, we recommend renaming your job types to follow this convention. Consistent names make job types easier to search and faster to book.
Age identifiers
Some recommended job types have a separate version for the age of the equipment or property, such as HVAC-Service-No Cool 10+. These versions are optional. What counts as older can vary by company and by the type of equipment, so you can change the age in the job type name to match how you define it. Older equipment usually needs a more experienced technician, so these versions often require a higher skill level and may have a higher priority.
If you use the Dispatch Automation agent, you may not need the age versions, because the agent considers the equipment on the customer's location when it chooses a technician. To learn more, see Why it's set up this way: how job types power Max.
Setting priority, duration, and sold threshold
Priority: Set most job types to Normal. Use High for emergencies and time-sensitive repairs, and Low for routine maintenance and follow-ups. Use Urgent rarely, for specific jobs, and not as a default priority. If too many job types are set high, the jobs that need immediate attention won't stand out. To flag a VIP or urgent job, use a tag instead.
Duration: Set a realistic duration for each job type. Scheduling and dispatching use it to plan your technicians' days. The durations in Job type reference by trade are a starting point; adjust them to match your team.
Sold threshold: Set it to at least $1 more than your diagnostic or dispatch fee. If you leave it at $0, every completed job counts as sold, which throws off your conversion and close rates.
Job summaries and Voice Agent job type descriptions
Each job type can have a default Summary, text that's added to the summary of every job booked with it. A good summary lists the questions CSRs should ask when they book the job.
If you use the Voice Agent, you can also give each job type a Voice Agent job type description that tells the agent when to book it. These descriptions only apply to the Voice Agent. You add them in Voice Agent settings, on the Job Types and Dispatch Fees page, in the Description column.
Suggested Voice Agent job type descriptions are in Job type reference by trade. Summaries and Voice Agent job type descriptions are both optional. Use them as a starting point, and edit them to match how your team books jobs.
Recalls and warranty visits
Each trade includes recall and warranty job types for return visits on work your company already did. Recalls are callbacks caused by workmanship issues. Warranty visits are callbacks caused by part failures. Use them for return visits, so callbacks are easy to track separately from new work. If you use the Voice Agent, it can book recalls too: when a caller says a problem came back after a recent visit, the Voice Agent books the new job linked to the original job as a recall.
Recommended job types by trade
Each list shows the job type name and a short description. For the full details, see Job type reference by trade.
HVAC
Name | Description |
|---|---|
HVAC-Estimate | Use as a single catch-all estimate visit: a comfort advisor quotes replacement of any HVAC system (furnace, AC, boiler, ductless, etc.) for a customer who has not yet committed to the work. |
HVAC-Estimate-AC | Use when a comfort advisor visits to quote replacement of a central air conditioning system for a customer who has not yet committed to the work. |
HVAC-Estimate-Boiler | Use when a comfort advisor visits to quote replacement of a boiler for a customer who has not yet committed to the work. |
HVAC-Estimate-Duct Modification | Use when a comfort advisor visits to quote ductwork modification, resizing, or repair for a customer who has not yet committed to the work. |
HVAC-Estimate-Ductless Mini-Split | Use when a comfort advisor visits to quote installation or replacement of a ductless mini-split system for a customer who has not yet committed to the work. |
HVAC-Estimate-Follow Up | Use when a comfort advisor returns to a previously quoted customer to revisit, adjust, or close a prior estimate (e.g., customer had questions or wanted a second option). |
HVAC-Estimate-Furnace | Use when a comfort advisor visits to quote replacement of a furnace for a customer who has not yet committed to the work. |
HVAC-Estimate-Heat Pump | Use when a comfort advisor visits to quote replacement or installation of a heat pump system for a customer who has not yet committed to the work. |
HVAC-Estimate-Oil to Gas | Use when a comfort advisor visits to quote converting a customer from an oil-fired system to a gas-fired furnace or boiler. |
HVAC-Install | Use as a single catch-all install job type covering any HVAC equipment install. |
HVAC-Install-AC | Use to physically install a new central air conditioning system per manufacturer specs and local code. |
HVAC-Install-AC Start-up | Use for the commissioning/start-up visit on a newly installed AC system — refrigerant charge verification, airflow check, and system walkthrough with the customer. |
HVAC-Install-Air Handler-Heat Pump | Use to install a matched air handler and heat pump system per manufacturer specs and local code. |
HVAC-Install-Boiler-Gas | Use to install a new gas-fired boiler per manufacturer specs and local code. |
HVAC-Install-Boiler-Oil | Use to install a new oil-fired boiler per manufacturer specs and local code. |
HVAC-Install-Boiler-Oil to Gas | Use for a full fuel-conversion install replacing an oil boiler with a new gas boiler, including gas line run and old oil tank decommissioning. |
HVAC-Install-Boiler-Steam | Use to install a new steam boiler per manufacturer specs and local code, including near-boiler piping and steam trap review. |
HVAC-Install-Combi Boiler | Use to install a combination (space heat + domestic hot water) boiler per manufacturer specs and local code. |
HVAC-Install-Duct Modification | Use to physically modify, resize, or repair ductwork per a previously sold estimate — commonly paired with a new equipment install to correct airflow issues. |
HVAC-Install-Ductless Mini-Split | Use to install a ductless mini-split system, including outdoor condenser, indoor head(s), and line-set/electrical run. |
HVAC-Install-Furnace/AC | Use to install a matched furnace and AC changeover system per manufacturer specs and local code. |
HVAC-Install-Furnace/AC-Oil | Use to install a matched oil furnace and AC changeover system per manufacturer specs and local code. |
HVAC-Install-Furnace-Gas | Use to install a new gas furnace per manufacturer specs and local code. |
HVAC-Install-Furnace-Oil | Use to install a new oil furnace per manufacturer specs and local code. |
HVAC-Install-Furnace-Oil to Gas | Use for a full fuel-conversion install replacing an oil furnace with a new gas furnace, including gas line run and old oil tank decommissioning. |
HVAC-Install-Geothermal | Use to install a geothermal heat pump system including ground loop tie-in per manufacturer specs and local code. |
HVAC-Install-Indirect Water Heater | Use to install an indirect-fired water heater tied to an existing or new boiler system. |
HVAC-Install-Package Unit | Use to install a packaged unit per manufacturer specs and local code. |
HVAC-Install-Pre-Site Evaluation | Use to assess site conditions ahead of an HVAC install or larger project (access, code constraints, existing ductwork/infrastructure) before quoting or scheduling the work. |
HVAC-Install-Recall | Use when a technician completed an HVAC install but the original problem persists. |
HVAC-Install-Skim Boiler | Use to perform a skim/skimming service on a steam boiler as part of an install or startup to remove oil film and ensure proper water quality. |
HVAC-Install-VRF System | Use to install a commercial VRF (variable refrigerant flow) system, including outdoor units, indoor units, and controller/BAS integration. |
HVAC-Install-Warranty | Use when a recently installed HVAC system needs work covered under the manufacturer or workmanship warranty. |
HVAC-Maintenance-Boiler | Use for a scheduled tune-up on a boiler; tag oil, steam, or gas as needed since fuel/system type changes the checklist and required certification. |
HVAC-Maintenance-Boiler Less Than 10 | Use only for boilers under 10 years old for a routine tune-up; tag oil, steam, or gas as needed. |
HVAC-Maintenance-Boiler 10+ | Use only for boilers 10 years or older, requiring advanced diagnostics and specialty fuel handling; tag oil, steam, or gas as needed. |
HVAC-Maintenance-Cooling Tune Up Less Than 10 | Use only for cooling systems under 10 years old — a routine seasonal tune-up to maximize lifespan and efficiency and catch small issues before failure. |
HVAC-Maintenance-Cooling Tune Up 10+ | Use only for cooling systems 10 years or older — a more thorough tune-up and inspection given the equipment's age and higher likelihood of developing issues. |
HVAC-Maintenance-Ductless Mini-Split | Use for a scheduled tune-up on a ductless mini-split system, including indoor head filter/coil cleaning and outdoor unit inspection. |
HVAC-Maintenance-Filter Change | Use for a stand-alone visit to replace HVAC air filters, maintaining indoor air quality and airflow without a full tune-up. |
HVAC-Maintenance-Heating Tune Up Less Than 10 | Use only for heating systems under 10 years old — a routine seasonal tune-up to maximize lifespan and efficiency and catch small issues before failure. |
HVAC-Maintenance-Heating Tune Up 10+ | Use only for heating systems 10 years or older — a more thorough tune-up and inspection given the equipment's age and higher likelihood of developing issues. |
HVAC-Maintenance-PM Inspection | Use for a scheduled preventive-maintenance inspection visit on commercial HVAC equipment under a PM contract. |
HVAC-Maintenance-Recall | Use when a technician completed a maintenance visit but the customer's issue persists. |
HVAC-Maintenance-Warranty | Use when equipment serviced under a maintenance plan needs additional work covered under warranty. |
HVAC-Service-Boiler 10+ | Use when the customer reports a problem with a boiler 10+ years old — requires advanced diagnostics given the equipment's age and higher failure risk. |
HVAC-Service-Boiler-20+ | Use when the customer reports a problem with a boiler 20+ years old — legacy equipment likely requiring specialty parts sourcing and a strong replacement conversation. |
HVAC-Service-CO Leak | Use when the customer reports a carbon monoxide alarm or suspected CO leak from any HVAC combustion equipment — dispatch immediately for combustion analysis and safety shutoff as needed. |
HVAC-Service-Dehumidifier | Use when the customer reports a whole-home dehumidifier under 10 years old is not working properly. |
HVAC-Service-Dehumidifier 10+ | Use when the customer reports a whole-home dehumidifier 10 years old or older is not working properly. |
HVAC-Service-Demand | Use as a generic diagnostic/repair dispatch for a system under 10 years old when the specific equipment type isn't yet known at booking — full inspection, diagnosis, and repair or adjustment. |
HVAC-Service-Demand 10+ | Use as a generic diagnostic/repair dispatch for a system 10+ years old when the specific equipment type isn't yet known at booking — flagged as a likely replacement opportunity. |
HVAC-Service-Demand-Boiler Less Than 10 | Use for a boiler-specific diagnostic/repair dispatch on a system under 10 years old, involving safety checks and system optimization. |
HVAC-Service-Demand-Boiler 10+ | Use for a boiler-specific diagnostic/repair dispatch on a system 10+ years old — flagged as a likely replacement opportunity. |
HVAC-Service-Duct Cleaning | Use for a stand-alone duct cleaning visit to remove dust/debris and improve indoor air quality, not tied to a repair. |
HVAC-Service-Duct Modification | Use when the customer reports airflow problems (hot/cold rooms, noise) requiring ductwork adjustment, resizing, or repair. |
HVAC-Service-Ductless Mini-Split Less Than 10 | Use when the customer reports a problem with a ductless mini-split system under 10 years old, including inverter board or refrigerant issues. |
HVAC-Service-Ductless Mini-Split 10+ | Use when the customer reports a problem with a ductless mini-split system 10+ years old, including inverter board or refrigerant issues — requires more thorough diagnostics and is a likely replacement opportunity. |
HVAC-Service-Furnace | Use when the customer reports a problem with a furnace under 10 years old; tag electric, gas, or oil as needed since fuel type changes the diagnostic path. |
HVAC-Service-Furnace 10+ | Use when the customer reports a problem with a furnace 10+ years old — requires more thorough diagnostics and is a likely replacement opportunity. |
HVAC-Service-Geothermal | Use when the customer reports a problem with a geothermal system 10+ years old — advanced ground-loop and heat-pump diagnostics required. |
HVAC-Service-Geothermal 10+ | Use when the customer reports a problem with a geothermal heat pump system under 10 years old — requires ground-loop diagnostic knowledge in addition to standard heat pump service. |
HVAC-Service-Geothermal 20+ | Use when the customer reports a problem with a geothermal system 20+ years old — legacy equipment likely nearing end of life; flag as a replacement opportunity. |
HVAC-Service-Humidifier | Use when the customer reports a whole-home humidifier under 10 years old is not working properly |
HVAC-Service-Humidifier 10+ | Use when the customer reports a whole-home humidifier 10+ years old is not working properly — requires more thorough diagnostics given equipment age. |
HVAC-Service-No Cool Less Than 10 | Use when the customer reports the AC/cooling system is not cooling on a system less than 10 years old and a technician is dispatched to diagnose and repair it same-day. |
HVAC-Service-No Cool 10+ | Use when the customer reports no cooling on a system 10 years or older — flagged as a likely replacement opportunity since diagnosis and parts availability are more involved. |
HVAC-Service-No Heat Less Than 10 | Use when the customer reports the heating system is not producing heat on a system that is less than 10 years old and a technician is dispatched to diagnose and repair it same-day. |
HVAC-Service-No Heat 10+ | Use when the customer reports no heat on a system 10 years or older — flagged as a likely replacement opportunity since diagnosis and parts availability are more involved. |
HVAC-Service-Pool Heater | Use when the customer reports a problem with a pool/spa heater under 10 years old. |
HVAC-Service-Pool Heater 10+ | Use when the customer reports a problem with a pool/spa heater 10+ years old — requires more thorough diagnostics given equipment age. |
HVAC-Service-Recall | Use when a technician completed a service/repair visit but the original problem persists. |
HVAC-Service-Repair | Use as a generic repair job type when the issue doesn't fit a more specific service job type. |
HVAC-Service-Thermostat | Use when the customer reports a thermostat is unresponsive, miswired, or needs replacement/upgrade (including smart thermostat installs). |
HVAC-Service-Warranty | Use when a technician completed a service/repair visit but there are issues that are covered under the manufacturer or workmanship warranty. |
For business units, skills, priorities, and durations, see the HVAC section of Job type reference by trade.
Plumbing
Name | Description |
|---|---|
PLM-Estimate | An Estimate job type used when an entry-level plumber visits to provide a cost estimate for general, non-specialized plumbing replacement work not tied to a single piece of equipment. |
PLM-Estimate-Pipe Leak | An Estimate job type used when a plumber visits to assess a known or suspected pipe leak (visible, slab, or wall-concealed) and provide a cost estimate for the repair or section replacement. |
PLM-Estimate-Remodel | An Estimate job type used when a plumber visits to quote plumbing rough-in and fixture work for a kitchen or bathroom remodel. |
PLM-Estimate-Repipe | An Estimate job type used when a plumber visits to quote a whole-home or partial re-pipe. |
PLM-Estimate-Sump Pump Less Than 10 | An Estimate job type used to quote replacement of a sump pump under 10 years old. |
PLM-Estimate-Sump Pump 10+ | An Estimate job type used to quote replacement of a sump pump 10 years or older, and to evaluate whether a battery backup is warranted. |
PLM-Estimate-Tankless Water Heater Less Than 10 | An Estimate job type used to quote replacement of a tankless water heater under 10 years old, usually after a repeated repair or error-code history. |
PLM-Estimate-Tankless Water Heater 10+ | An Estimate job type used to quote replacement of a tankless water heater 10 years or older, or to quote a tank-to-tankless conversion. |
PLM-Estimate-Water Heater Less Than 10 | An Estimate job type used when a plumber visits to quote replacement of a water heater under 10 years old, typically after a customer-reported issue rather than a straight age-driven replacement. |
PLM-Estimate-Water Heater 10+ | An Estimate job type used when a plumber visits to quote replacement of a water heater 10 years or older, where age alone is a strong driver of the replacement conversation. |
PLM-Install-Fixture | An Install job type used to physically install a new or replacement toilet or plumbing fixture according to manufacturer specifications and local code. |
PLM-Install-Geothermal | An Install job type used to physically install the plumbing-side piping and loop connections for a geothermal water system according to manufacturer specifications, local code, and permit requirements. |
PLM-Install-Recall | An Install-Recall job type is used when a technician needs to return to correct or finish an installation issue shortly after the original install job. |
PLM-Install-Repipe | An Install job type used to physically re-pipe a residential property, removing old or damaged pipe and installing new supply lines according to code and permit requirements. |
PLM-Install-Tankless Water Heater | An Install job type used to physically install a tankless water heater, including any required gas-line, venting, or electrical upgrades, according to manufacturer specifications, local code, and permit requirements. |
PLM-Install-Warranty | An Install-Warranty job type is used when a defect in a recently installed fixture or system is still covered under the manufacturer or company installation warranty. |
PLM-Install-Water Heater | An Install job type used to physically install a standard tank-style water heater according to manufacturer specifications, local code, and permit requirements. |
PLM-Maintenance | A recurring Maintenance job type used for members/prepaid-contract customers receiving their scheduled whole-home plumbing checkup at no additional charge. |
PLM-Maintenance-Outside Water Sewage | A Maintenance job type used for a scheduled inspection and preventive service of exterior water/sewage components (exterior cleanouts, lift stations, yard hydrants) to catch small issues before they become failures. |
PLM-Maintenance-Recall | An Install-Recall job type is used when a technician needs to return to correct or finish an installation issue shortly after the original install job. |
PLM-Maintenance-Tankless Water Heater Less Than 10 | A Maintenance job type used for a scheduled descale/flush of the heat exchanger on a tankless water heater under 10 years old, to remove mineral buildup and maintain efficiency. |
PLM-Maintenance-Tankless Water Heater 10+ | A Maintenance job type used for a scheduled descale/flush and thorough component inspection on a tankless water heater 10 years or older, since aging units need more thorough inspection of the heat exchanger and internal components. |
PLM-Maintenance-Warranty | An Install-Recall job type is used when a technician needs to return to correct or finish an installation issue shortly after the original install job. |
PLM-Maintenance-Water Heater Flush Less Than 10 | A Maintenance job type used for a scheduled tank flush and anode-rod/TandP-valve check on a standard tank water heater under 10 years old, to maximize lifespan and efficiency. |
PLM-Maintenance-Water Heater Flush 10+ | A Maintenance job type used for a scheduled tank flush and thorough condition inspection on a standard tank water heater 10 years or older, since aging tanks need more thorough inspection for corrosion and impending failure. |
PLM-Service-Backflow Test | A Service job type used when a technician tests a residential backflow prevention device, verifies proper function, and files the compliance report required by the local water authority. |
PLM-Service-Booster-Pump Less Than 10 | A Service job type used when the customer reports low water pressure from a booster pump system under 10 years old, and a technician is dispatched to diagnose and repair it. |
PLM-Service-Booster-Pump 10+ | A Service job type used when the customer reports a problem with a booster pump system 10 years or older. |
PLM-Service-Demand | A Service job type used for a general residential plumbing demand call covering leaks, clogged fixtures, or malfunctioning parts not yet categorized to a more specific job type. |
PLM-Service-Dewinterize | A Service job type used to dewinterize a property's plumbing system in spring (restore water service, check for freeze damage, restart exterior lines) after being shut down for winter. |
PLM-Service-Dryer Vent Cleaning | A Service job type used to clean and clear a clogged or lint-restricted dryer vent line, reducing fire risk and restoring proper dryer airflow. |
PLM-Service-Frozen/Burst Pipes | A Service job type used when the customer reports a frozen or burst pipe, and a technician is dispatched urgently to thaw, isolate, and repair the affected line to prevent further water damage. |
PLM-Service-Gas-Leak | A Service job type used when the customer reports a suspected gas leak or gas odor, and a technician is dispatched immediately to locate, isolate, and repair the leak. |
PLM-Service-Indirect Water Heater Less Than 12 | A Service job type used when the customer reports a problem with a boiler-fed indirect water heater under 12 years old, and a technician is dispatched to diagnose and repair it. |
PLM-Service-Indirect Water Heater 12+ | A Service job type used when the customer reports a problem with a boiler-fed indirect water heater 12 years or older. |
PLM-Service-No Hot Water | A Service job type used when the customer reports no hot water or intermittent hot water from a water heater under 10 years old and a technician is dispatched to diagnose and repair it. |
PLM-Service-Plumbing Leak | A Service job type used when the customer reports a visible plumbing leak (fixture, supply line, drain line), and a technician is dispatched to diagnose and repair it. |
PLM-Service-Recall | An Install-Recall job type is used when a technician needs to return to correct or finish an installation issue shortly after the original install job. |
PLM-Service-Repair | A Service job type used for a general plumbing repair visit where the scope is broader or takes longer than a standard demand call (e.g., multiple fixtures, moderate access work), and a technician is dispatched to diagnose and repair it. |
PLM-Service-Slab-Leak | A Service job type used when the customer reports symptoms of a concealed slab leak (hot spots on the floor, unexplained water bill increase, sound of running water), and an advanced technician is dispatched to locate and repair it using leak-detection equipment. |
PLM-Service-Sump Pump Less Than 10 | A Service job type used when the customer reports a problem with a sump pump under 10 years old (not turning on, running continuously), and a technician is dispatched to diagnose and repair it. |
PLM-Service-Sump Pump 10+ | A Service job type used when the customer reports a problem with a sump pump 10 years or older. |
PLM-Service-Tankless Water Heater Less Than 10 | A Service job type used when the customer reports an error code or performance issue with a tankless water heater under 10 years old, and a technician is dispatched to diagnose and repair it. |
PLM-Service-Tankless Water Heater 10+ | A Service job type used when the customer reports an error code or performance issue with a tankless water heater 10 years or older. |
PLM-Service-Warranty | An Install-Recall job type is used when a technician needs to return to correct or finish an installation issue shortly after the original install job. |
PLM-Service-Water Heater Less Than 10 | A Service job type used when the customer reports a problem (leak, no hot water, noise) with a standard tank water heater under 10 years old, and a technician is dispatched to diagnose and repair it. |
PLM-Service-Water Heater 10+ | A Service job type used when the customer reports a problem with a standard tank water heater 10 years or older. |
PLM-Service-Well-Pump Less Than 10 | A Service job type used when the customer reports a problem with a residential well pump under 10 years old (short-cycling, low pressure, no water), and a technician is dispatched to diagnose and repair it. |
PLM-Service-Well-Pump 10+ | A Service job type used when the customer reports a problem with a residential well pump 10 years or older. |
PLM-Service-Winterize | A Service job type used to winterize a property's plumbing system (blow out irrigation/exterior lines, shut off and drain vulnerable piping) ahead of freezing weather, protecting against burst pipes. |
For business units, skills, priorities, and durations, see the Plumbing section of Job type reference by trade.
Drain cleaning
Name | Description |
|---|---|
DC-Estimate | An Estimate job for general drain/sewer project type used for entry-level assessment of sewer or drain replacement, drain cleaning, or repair. |
DC-Estimate-Excavation | An Estimate job type used for master-level assessment of an open-cut excavation sewer or drain replacement, requiring grade, soil-type, and permit knowledge. |
DC-Estimate-Pipe Lining | An Estimate job type used to quote a trenchless CIPP (cured-in-place pipe) lining repair for a damaged sewer line, avoiding open excavation. |
DC-Estimate-Sewer Line | An Estimate job type used to quote replacement of a residential sewer line based on a known or suspected failure (recurring backups, camera-confirmed damage). |
DC-Estimate-Trenchless | An Estimate job type used to quote a trenchless (pipe-bursting) sewer line replacement, minimizing disruption to landscaping and structures compared to open-cut excavation. |
DC-Install-Excavation | A Service job type used for an emergency open-cut excavation repair of a collapsed or severely damaged sewer line, requiring shoring, grade work, and advanced excavation safety practices. |
DC-Install-Pipe Lining | An Install job type used to physically perform a CIPP (cured-in-place pipe) lining installation inside an existing damaged sewer line, according to code and permit requirements. |
DC-Install-Recall | An Install-Recall job type is used when a technician needs to return to correct or finish a drain/sewer installation issue shortly after the original install job. |
DC-Install-Sewer Line Replacement | An Install job type used to physically replace a residential sewer line via open excavation, according to code and permit requirements. |
DC-Install-Sump Pump | An Install job type used to physically install a new sump pump and discharge line according to manufacturer specifications and local code. |
DC-Install-Trenchless | An Install job type used to physically replace a sewer line using trenchless (pipe-bursting) technology, according to code and permit requirements. |
DC-Install-Warranty | An Install-Warranty job type is used when a defect in a recently installed drain or sewer system is still covered under the manufacturer or company installation warranty. |
DC-Maintenance | A Maintenance job type used for a scheduled, annual preventive hydro-jetting of the main sewer line to clear grease, scale, and minor root growth before it causes a backup. |
DC-Maintenance-Jetting | A Maintenance job type used for a scheduled, annual preventive hydro-jetting of the main sewer line to clear grease, scale, and minor root growth before it causes a backup. |
DC-Service-Camera Inspection | A Service job type used for a stand-alone CCTV camera inspection of a drain or sewer line to identify blockages, root intrusion, bellies, or pipe damage, whether or not it is tied to a repair. |
DC-Service-Drain Clog | A Service job type used to clear a clogged secondary drain line connected to a fixture (sink, shower, or toilet) in a home under 10 years old. |
DC-Service-Drain Demand | A Service job type used as the general catch-all for a residential drain and sewer demand call (clogged drains, blockages, camera inspections, or backups) not yet categorized to a more specific job type. |
DC-Service-Hydro-Jetting | A Service job type used when high-pressure water jetting is needed to clear stubborn clogs, grease buildup, or debris that a standard cable machine cannot fully clear. |
DC-Service-Main Line Clog | A Service job type used to clear a blockage in the primary sewer line of a home under 10 years old using a cable machine or auger, restoring proper drainage throughout the plumbing system. |
DC-Service-Recall | An Install-Recall job type is used when a technician needs to return to correct or finish a drain/sewer installation issue shortly after the original install job. |
DC-Service-Sewer Ejector Pump Less Than 10 | A Service job type used when the customer reports a problem with a sewer ejector pump under 10 years old (not running, alarm sounding, backing up), and a technician is dispatched to diagnose and repair it. |
DC-Service-Sewer Ejector Pump 10+ | A Service job type used when the customer reports a problem with a sewer ejector pump 10 years or older. |
DC-Service-Sewer Line Repair | A Service job type used for a targeted, spot repair or fitting replacement on a sewer line, short of a full line replacement, and a technician is dispatched to diagnose and repair it. |
DC-Service-Sewer Odor | A Service job type used when the customer reports a sewer gas odor inside or outside the home, and a technician is dispatched to locate the source (dry trap, vent issue, cracked line) and repair it. |
DC-Service-Warranty | An Install-Warranty job type is used when a technician needs to return to correct an issue after the original install job that is under warranty. |
For business units, skills, priorities, and durations, see the Drain cleaning section of Job type reference by trade.
Electrical
Name | Description |
|---|---|
ELEC-Install | Used for mid-size equipment installs expected to take roughly half a day (e.g., subpanel, dedicated circuits, multiple fixtures) that don't rise to a full-day project. |
ELEC-Install-EV Charger | Used to install a dedicated circuit and Level 2 EV charging station, typically booked from a sold EV Charger Estimate. |
ELEC-Install-Fixture Install | Used for smaller-scope installs such as light fixtures, ceiling fans, outlets, or switches that do not require a full electrician crew day. |
ELEC-Install-Panel Replacement | Used to install a new electrical panel only, typically booked from a sold Estimate. |
ELEC-Install-Permit | Used to install a dedicated circuit and Level 2 EV charging station, typically booked from a sold EV Charger Estimate. |
ELEC-Install-Pre-Site Evaluation | Used to assess site conditions ahead of an electrical install or larger project (panel location, access, code constraints, existing infrastructure) before quoting or scheduling the work. |
ELEC-Install-Recall | Used when a technician completed an Install job but there are issues with the newly installed panel or fixture. |
ELEC-Install-Remodel | Used for full or partial home rewire/remodel install work booked from a sold Rewire/Remodel Estimate. |
ELEC-Install-Rewire | Used for full or partial home rewire/remodel install work booked from a sold Rewire/Remodel Estimate. |
ELEC-Install-Warranty | Used when a prior electrical install job is still covered under a workmanship or parts warranty period. |
ELEC-Maintenance | A Maintenance job type used for a scheduled, routine electrical tune-up/preventive visit (tightening connections, testing GFCI/AFCI devices, checking the panel for corrosion or overheating) to catch small issues before they become failures. |
ELEC-Maintenance-Safety Inspection | Used for a stand-alone electrical safety or code-compliance check, not tied to a repair or maintenance visit. |
ELEC-Sales-Estimate | Used when the customer wants a cost estimate to replace an existing electrical service/meter/panel component rather than a new installation. |
ELEC-Sales-Estimate-EV Charger | Used to provide a cost estimate for installing a Level 2 EV charger circuit and charging station. |
ELEC-Sales-Estimate-Panel Upgrade | Used when a technician assesses the existing electrical panel and provides a cost estimate to upgrade service capacity (e.g., 100A to 200A). |
ELEC-Sales-Estimate-Rewire/Remodel | Used to provide a cost estimate for a full or partial home rewire/remodel work. |
ELEC-Sales-Estimate-Service Replacement | Used to provide cost estimate to replace their electrical service (the utility-side service entrance/meter connection), separate from a panel-only upgrade. |
ELEC-Service-Demand | Used when the customer reports a specific breaker (or breakers) repeatedly tripping. |
ELEC-Service-Electrical Panel | Used when customer reports the electrical panel is showing a specific problem — tripping breaker, buzzing, burn marks, or a breaker that won't reset — as distinct from a full home power outage. |
ELEC-Service-No Power | Used when the customer reports partial or total loss of power to the home or a section of it. |
ELEC-Service-Recall | Used when a technician completed a Service/repair job but the original problem persists. |
ELEC-Service-Repair | Used when repair work has already been quoted and approved by the customer, but completion is pending — commonly because parts or specialty equipment had to be ordered. |
ELEC-Service-Warranty | Used when a prior electrical repair is still covered under a workmanship or parts warranty period. |
For business units, skills, priorities, and durations, see the Electrical section of Job type reference by trade.
Generators
Name | Description |
|---|---|
GEN-Estimate | Used when a customer wants a quote for a standby/whole-home generator (e.g., Generac). |
GEN-Install | Used to install a standard whole-home standby generator (typically under 22kW) with automatic transfer switch, booked from a sold Generator Estimate. |
GEN-Install-Recall | Used when a newly installed generator or the installation workmanship has an issue. |
GEN-Install-Warranty | Used when a newly installed generator or the installation workmanship is still covered under a manufacturer or company warranty period. |
GEN-Install-Pre-Site Evaluation | Used to assess site conditions ahead of a generator install (pad/mounting location, gas line routing, electrical panel location and access, clearances from windows/doors) before quoting or scheduling the work. |
GEN-Maintenance-Less Than 20 | Used for planned preventive maintenance on a standby generator roughly under 20 years old — annual service or PM, no active fault. |
GEN-Maintenance-20+ | Used for planned preventive maintenance on a standby generator roughly 20 years or older — legacy equipment, no active fault. |
GEN-Maintenance-Recall | Used when a technician completed a generator maintenance visit but the original issue persists. |
GEN-Maintenance-Warranty | Used when generator maintenance work is still covered under a manufacturer or company maintenance-plan warranty. |
GEN-Service-Demand Less Than 10 | Used for a residential generator service call with no specific installation or maintenance context or is under 10 years old— most commonly a no-power/won't-start call during or right before a utility outage. |
GEN-Service-Demand 10+ | Used for diagnosis and repair of a generator 10+ years old, since parts availability and diagnostic complexity are greater on legacy engine/control systems. |
GEN-Service-Recall | Used when a technician completed a Generator Service job but the original problem persists. |
GEN-Service-Warranty | Used when generator maintenance/service work is still covered under a manufacturer or company maintenance-plan warranty. |
GEN-Service-Repair | Used when generator repair work has already been quoted and approved, but completion is pending — commonly because a part (control board, transfer switch, battery) had to be ordered. |
For business units, skills, priorities, and durations, see the Generators section of Job type reference by trade.
Garage doors
Name | Description |
|---|---|
GAR-Install-Door | An Install job type used to physically install a garage door according to manufacturer specifications and local code. |
GAR-Install-Door-Premium | Use the Premium install variant for higher-end doors (custom wood, full-view glass, heavy insulated steel) that require additional care, reinforced hardware, or custom track work. |
GAR-Install-Opener | An Install job type used to physically install a garage door opener according to manufacturer specifications. |
GAR-Install-Paint Job | Covers scheduling/performing the install of painting a garage door. |
GAR-Install-Recall | Return visit on a prior install — something the install crew did is not working or unfinished. |
GAR-Install-Return Service | A return trip tied to a recent install to finish, adjust, or address something the customer flagged after the crew left. |
GAR-Install-Site Check | A Pre-Site Evaluation used to assess opening conditions (headroom, backroom, sideroom, structural framing) ahead of a garage door or opener install, before quoting or scheduling the work. |
GAR-Install-Warranty | Used when there is an issue related to a previously installed door or opener covered under warranty (parts/labor, typically no charge). |
GAR-Maintenance-Safety Inspection | An Inspection job type used for a stand-alone safety check of the door, springs, cables, and opener auto-reverse/sensor function, not tied to a repair or tune-up visit. |
GAR-Maintenance-Tune-Up | A Maintenance job type used for a scheduled, routine tune-up on a garage door and opener to maximize lifespan and catch small issues (loose hardware, worn rollers, misaligned sensors) before they become failures. |
GAR-Sales-Estimate Door Replacement 1 Door Less Than 8 yrs | An Estimate job type used when a sales rep/comfort advisor visits to provide a cost estimate or proposal for a new or replacement of a single garage door that is less than 8 years old.Use it for pre-qualified sales leads where the customer has not yet committed to the work. |
GAR-Sales-Estimate Door Replacement 1 Door 8+ yrs | An Estimate job type used to quote replacement of a single garage door more than 8 years old. |
GAR-Sales-Estimate Door Replacement 2+ Doors Less Than 8 yrs | An Estimate job type used to quote replacement of two or more garage doors, each less than 8 years old. |
GAR-Sales-Estimate Door Replacement 2+ Doors 8+ yrs | An Estimate job type used to quote replacement of two or more garage doors, each more than 8 years old. |
GAR-Sales-Estimate New Door | Customer wants a price or quote for a garage door where none exists today (new construction or a new opening) — not a replacement of an existing door. |
GAR-Sales-Estimate Opener | An Estimate job type used when a sales rep visits to quote replacement or installation of a garage door opener. |
GAR-Service-Afterhours Emergency | Used for after-hours or emergency dispatch calls outside normal business hours where the door is unsafe, won't close, or a vehicle is trapped. |
GAR-Service-Door Off Track-Won't Open | Used when the door has come off its track or is jammed and won't open/close. |
GAR-Service-Opener Repair | A Sold Repair job type used when repair work (opener board) has already been quoted and approved, but completion is pending, commonly because parts had to be ordered. |
GAR-Service-Panel Replacement | Used when one or more door panels are dented, cracked, or otherwise damaged (commonly from a vehicle impact) and need to be replaced without replacing the entire door. |
GAR-Service-Recall | Callback on a prior service visit — the tech was recently out and the same problem is back or wasn't fully fixed. |
GAR-Service-Remote-Keypad Programming | Used for a stand-alone visit to program or replace remotes, keypads, or vehicle-integrated (HomeLink-style) controls without any mechanical repair. |
GAR-Service-Repair | |
GAR-Service-Repair-1 Door Less Than 8 yrs | Use when the single door being serviced is more less than 8 years old. |
GAR-Service-Repair-1 Door 8+ yrs | Use when the single door being serviced is more than 8 years old. |
GAR-Service-Repair-2+ Doors Less Than 8 yrs | Use the 2+ door variant for a service repair call covering multiple doors on the same visit for doors less than 8 years old, for shops that price service by door count. |
GAR-Service-Repair-2+ Doors 8+ yrs | Use when two or more doors being serviced on the same visit are each more than 8 years old. |
GAR-Service-Warranty | Used when an issue that was fixed on previous Garage door service/repair job is covered under warranty. |
For business units, skills, priorities, and durations, see the Garage doors section of Job type reference by trade.
Water treatment
Name | Description |
|---|---|
WAT-Install | A general install job type used when scheduling a sold general water-treatment equipment install — deposit paid / install date being confirmed. |
WAT-Install-Recall | An install recall job type used for a return visit on a prior water-treatment install — something the install crew did is not working or unfinished. |
WAT-Install-RO | An install job type used for scheduling a sold reverse-osmosis (RO) drinking-water system install — deposit paid / install date being confirmed. |
WAT-Install-UV | An install job type used for scheduling a sold UV water-disinfection system install — deposit paid / install date being confirmed. |
WAT-Install-Warranty | A job type used for an issue related to a previously installed Water-treatment work covered under warranty. |
WAT-Install-Water Softener | An install job type used for scheduling a sold water softener install — deposit paid / install date being confirmed and required equipment has been received and is ready for installation. |
WAT-Install-Whole House Filtration | An install job type used for scheduling a sold whole house filtration system— deposit paid / install date being confirmed and required equipment has been received and is ready for installation. |
WAT-Sales-Estimate | A job type used when a customer wants a price or quote on a water-treatment system — softener, RO, UV, or whole-house filtration. |
WAT-Sales-Water Test / Consultation | A job type used for a water-quality test and consultation — assessing hardness, contaminants, or taste/odor issues, usually as a first step before recommending or quoting equipment. |
WAT-Service-Demand | A job type used as general/catch-all water-treatment diagnostic dispatch — a softener, RO, UV, or filtration system malfunctioning or not performing as expected. |
WAT-Service-Salt Delivery | A job type used for salt delivery/refill for an existing water softener — no diagnostic visit needed. |
WAT-Service-Sold Repair | A job type used for a return trip for water-treatment repair work already quoted, or a special-order part that has now arrived — not a new problem. |
WAT-Service-Water Delivery | A job type used for bottled or bulk water delivery — not a repair or diagnostic visit. |
For business units, skills, priorities, and durations, see the Water treatment section of Job type reference by trade.
Septic
Name | Description |
|---|---|
SEP-Estimate | A job type used when a customer wants a price or quote on a new septic system, a replacement, or a major repair project. |
SEP-Install | A job type used for scheduling a sold septic system install or replacement — deposit paid / install date being confirmed. |
SEP-Install-Recall | A job type used for a return visit on a prior septic install — something the install crew did is not working or unfinished. |
SEP-Install-Warranty | A job type used for an issue related to previously installed septic work performed by the company that is covered under warranty. |
SEP-Service-Diagnostic | A job type used for general/catch-all septic diagnostic dispatch — backups, odor, slow drains, or a wet/soggy drain field with the specific cause unknown at booking. |
SEP-Service-Emergency Pumping | A job type used for emergency septic issues like overflowing, backing up into the home, or surfacing in the yard — high priority, needs pumping now. |
SEP-Service-Filter Cleaning | A job type used for scheduled cleaning of the septic tank's effluent filter — a routine maintenance task, no active backup. |
SEP-Service-Inspection | A job type used for a septic system inspection with no active emergency — home purchase/sale, permit/compliance requirement, or peace of mind. |
SEP-Service-Recall | A job type used when there is a callback on a prior septic service visit — the same issue is back or wasn't fully fixed. |
SEP-Service-Routine Pumping | A job type used for routinely scheduled, non-emergency septic tank pump-out — regular maintenance interval, no active backup. |
SEP-Service-Septic Tank Cleaning | A job type used for scheduled cleaning of the septic tank itself (beyond a standard pump-out) — sludge/scum layer removal. |
SEP-Service-Warranty | A job type used for septic service work covered under warranty--associated to recently completed septic service work. |
SEP-Sold Repair | A job type used for a return trip for septic repair work already quoted, or a special-order part that has now arrived — not a fresh problem. |
For business units, skills, priorities, and durations, see the Septic section of Job type reference by trade.